5 Ultimate Rules of Carpet Cleaning | Mi2 Cleaning

People use many methods to clean their carpet. But, there are some common methods of cleaning carpet. We follow these formulas of cleaning always. We should learn these formulas for our own need. Let’s see the most common five methods of cleaning carpet.

1.       Dry Soil Removal

Dry soil removal is an effective way to remove dust from carpet. But it isn’t effective for always. You can only use this system when the carpet isn’t dusted roughly. If your carpet dusted heavily, then you have to use steam cleaning method to wash out the dusts. 

2.       Soil suspension

Soil suspension through chemical action to dissolve, suspend and emulsify soils; elevated temperature (heat) to excite chemicals for optimum performance; agitation for uniform chemical distribution to achieve maximum contact with soils; dwell time to allow chemicals to suspend embedded or oxidized soils.

3.       Wet extraction

Wet extraction is another great way to clean carpet. It is a kind of method where the soil were cleaned out through absorption, wet vacuuming, rinsing to flush suspended soils from fibers, and/or dry vacuuming following cleaning and drying to remove detergent and soil residues. Expert cleaners prefer this method most than others.

4.       Grooming

Grooming is also a good suggestion for your carpet. Some expert cleaners prefer this method to clean out the carpet. It is difficult to clean by a newbie in this method. 

5.        Drying

Drying to minimize customer inconvenience and promote safety and health use adequate ventilation for speeding up drying time. The use of commercial air movers (drying fans) or HVAC handling systems, dehumidifiers, greatly reduce drying time.

So, these are the common methods of carpet steam cleaning inSydney. Hope these methods will help you to improve the condition of your home. Thank you.

Types of Soil on Carpet | Mi2 Cleaning

There are many types of soils that affected our carpet badly. To clean carpet effectively, you should know the physical and chemical properties of soil types.You need to know the types of soil on carpet for carpet cleaning in Sydney.

• ·         Water-soluble soils include materials that dissolve easily in water, such as sugar, starches, salts and other fluidic residues.

• ·         Dry solvent-soluble soils include asphalt, tar, grease, and animal or vegetable oils that are produced when cooking food. Oily soils also accumulate on carpet just inside entries from specialized work areas or parking lots (particularly asphalt or top coated areas).

• To compound the problem, if oily soils are allowed to remain in the carpet too long without being removed, they may dry out or "oxidize." When this occurs, a hard, yellow, lacquer-like film is formed which requires additional time and aggressive chemicals for removal.

• Some oleophilic (oil loving) fibers (polyester, olefin) may actually absorb oily soils over time, leaving a yellowish cast to traffic areas that cannot be removed with cleaning. With proper pre-treatment and maximum application of the principles of cleaning, oxidized oils may be removed almost as easily as other types of soil.

• ·         Insoluble soil includes particles, such as clay, sand (disintegrated rock particles), quartz (mineral composed of silica), feldspar (silicate of aluminum combined with other elements), limestone (calcium carbonate), gypsum (plaster of Paris) and carbon. Insoluble soil also includes cellulosic fiber from clothing, paper products, grass and leaf fragments, and protein fibers shed by human beings, pets and clothing.

• Dermatologists estimate that average adults shed over 300 hairs per day from various parts of their bodies along with some 300,000 skin cells. Much of this soil winds up on the horizontal surfaces in the home or business, including the carpet.

• All these soils are classified as insoluble in the sense that they cannot be dissolved with chemicals used in normal cleaning. Therefore, they must be removed in some other manner; otherwise, they remain in carpet even after cleaning as a form of soil

5 Major Principles of Carpet Cleaning | Mi2 Cleaning

Carpet cleaning is a regular household chore in our daily life. We need to clean our carpet regular basis to keep clean the room and get a healthy environment in the room. We know some cleaning rules of carpet cleaning. But, the professional cleaners of Mi2 Cleaning give us five major principles of carpet steam cleaning Sydney. Let’s see the rules. 

1.       Dry vacuuming

Based on many tests conducted by independent associations and agencies in recent years, it is unreasonable to suggest that dry soil removal is not an essential procedure to perform before wet cleaning begins. Dry soil removal is accomplished in one preparatory (required occasionally) and three physical removal phases. First, pile preparation (using grooming tools) to untangle the pile of some high-pile residential carpet may be necessary before dry vacuuming.

2.       Soil suspension

There are four fundamental factors to be considered under the soil suspension principle. They include chemical action, heat or temperature, agitation and time. These factors are discussed in that order.

3.       Chemical action

Chemical activity is employed in two phases of the cleaning process. First and foremost, chemicals are used to prepare the carpet for cleaning by reducing surface tension, dissolving, emulsifying, suspending, and sequestering various soils. This step, called preconditioning is essential.

4.       Heat cleaning

Heat reduces the surface tension of water, and enables faster, more efficient cleaning than cold water. It is a matter of thermodynamics, or the ability of heat to accelerate the activity of the chemicals employed. State-of-the-art, truck-mounted extraction equipment is able to generate a safe and consistent water temperature.

5.       Agitation

Agitation in some form is fundamental to accomplish uniform chemical penetration and distribution. Without this important step, soil suspension is superficial and non-uniform, perhaps even resulting in soil streaks following extraction.

5 Ways to Remove Spots and Stains from Carpet | Mi2 Cleaning

There are many ways to remove spots and stains from carpet. People use many ways to remove spots and spills from carpet. But, you have to follow a strict direction to clean carpet. The clean experts of Mi2 Cleaning give some tips to remove spots and spills for the carpet steam cleaning in Sydney . Let’s see these steps:

1.       Applying Water

The first step of cleaning is to water the carpet. If the spill is fresh and not a big thing, then it would be easier to you to clean the spots and stains. Just water the spill completely. If it doesn’t work, then follow the next rules.

2.       Locate the spills

Find out the place of spills. It would be better for you to find out the spills as soon as possible. After finding the spots and spills, take next steps to remove these.

3.       Check spot removal agent

Pretest any spot removal agent in an inconspicuous area to make certain the solution will not damage the fiber or the dye. After applying several drops to the testing area, hold a white cloth on the wet area for ten seconds. Examine the carpet and cloth for color transfer, color change, or damage to the carpet. If a change occurs, another cleaning solution must be selected.

4.       Blot it

Blot the place as much as possible. If needed blot it repeatedly and keep it mind that never scrub it. Apply a small amount of the selected cleaning solution to a white cloth and blot.

5.       Use the same policy

Try to use same policy as long as possible. It would help the carpet to get a longer life. It also helps you to keep away from different hassles in different time.

So, these are the general process of cleaning spots and stains from carpet. Thus, call a specialist carpet cleaner in Sydney to remove spots and spills from carpet.